EOS EMOTEC B6000 Guide de l'utilisateur télécharger pdf (Page 13)

13GB

90

P 1

P 1

P 3

Use the selection buttons and to set

the temperature. The arrow on the

thermometer symbol displays the selected

temperature level.

Finally, press and hold the "MODE" button

until the heating symbol besides the ente-

red value begins to blink.

This confirms the entered value.

Changing the default temperature

Temperature setting

By default the temperature for Finnish

operation is set to 95°C. To change this

parameter, press the "MODE" button.

P1 then appears on the display in the

programming area.

Press the

button repeatedly until P3

and the heating symbol appear on the

display, and confirm this with the "MODE"

button.

The thermometer symbol appears, and the

heating symbol begins to blink.

To select an alternate start-up time, press

the "MODE" button. The selection symbol

P1 appears on the display.

Delayed startup

Using the time preset , you can set your

sauna system to start up within 24 hours.

Always check for objects on the

sauna oven before starting up the

sauna. Fire hazard!

Press the "MODE" button again and you

see the actual start-up time.

15:07

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19

Commentaires sur ces manuels

Pas de commentaire